A gabion wall blocks all wind! To avoid damage and injury caused by accidents, always take the following precautions: 1. Evaluate whether the project site is exposed to strong winds. A filled Zenturo® wall of 200 x 200 cm (= maximum panel size) installed with the new post system – withstands a frontal wind load of 120 km / h. 2. Make sure the posts are anchored deep enough in the soil with concrete. 3. Never exceed the maximum wall height: 200 cm. 4. Strictly follow the instructions
The panels are made of galvanized wire, and an adhesion layer is provided for perfect adhesion with the polyester top coat (min. 100 microns). The posts are internally and externally galvanized (min. layer thickness 275g/m², both sides combined) according to Euronorm 10326, after which an adhesion layer is applied and polyester plastic coated (min. 60 microns).
Your Zenturo privacy wall will be created with Zenturo Super panels, rectangular Zenturo posts, and specifics accessories. Zenturo Super panels have narrower meshes than Zenturo, making them ideally suited for gabion walls. In combination with the Zenturo post concept and associated spider fixators, a wide variety of infills can be used to create a personal aesthetic system
LIABILITY DISCLAIMER
Betafence's liability is limited to any damage for which and insofar as Betafence could be held liable in accordance with imperative legal stipulations. Direct or indirect
damage (including consequential loss) and/or immaterial damage is / are excluded. Betafence is not liable for any damage caused during or as a result of the
installation, or for any damage due to incorrect or incomplete installation. These products come with an installation guide that can also be found below on this page or on the Betafence Group Youtube Channel. These instructions must be strictly followed. If you do not have the necessary skills to install the products yourself, you are advised to ask a professional for assistance. The Zenturo Super system is part of the Betafence EU Guarantee policy.