Wigs clean up

Use a hairbrush or comb to comb the wig from the end of the hair. Gently comb the ends of the wig. After straightening out the knotted or entangled parts, slowly comb up to the root of the hair until the brush or comb can pass through the hair smoothly.

 

For more information, please visit .

After wearing the wig for a period of time, cleaning your wig is a must, but how to do it correctly? Follow the steps recommended by our professional wig manufacturers and industry experts:

 

Step #1:

Use a hairbrush or comb to comb the wig from the end of the hair. Gently comb the ends of the wig. After straightening out the knotted or entangled parts, slowly comb up to the root of the hair until the brush or comb can pass through the hair smoothly. Use a wire wig brush to comb straight hair or wavy wigs; use a wide tooth comb or fingers to comb curly hair wigs.

 

Step #2:

Prepare a basin of water, be careful not to use hot water; squeeze the shampoo in your hands, then gently rub them; put the shampoo in the water and mix well until the water produces a thick foam. Do not apply the shampoo directly on the wigs.

 

Step #3:

Put the wig into the water and soak it for 3-5 minutes. When the wig is in the water, do not rub the wig or it will cause the wig to knot; just gently shake the wig to make the shampoo evenly distributed on each part of the wig. Then only need to keep the wig in the water for 3-5 minutes, Remember to not rub the wig.

 

Step #4:

Hold the top of the wig with your hand, slide along the direction of the wig; gently squeeze the water off the wig, repeat this several times until the wig is clean. For stains on the hairnet, you can turn the wig over and gently touch the hairnet with your fingers until the stain is washed away.

 

Step #5:

Prepare a second basin of clean water, put the wig into the water for washing or rinse directly with water, as in step #4; squeeze the water off the wig by hand until the shampoo on the wig is washed away.

 

Step #6:

Prepare a third basin of clean water, mix the conditioner evenly in the water, put the wig into the water so that the conditioner is evenly distributed throughout the wig. Keep the wig in the water for 3 minutes.

 

Step #7:

Use the same method as step #4 and step #5 to squeeze out the water from the wig.

 

Step #8:

Prepare a soft and dry towel, place the wig smoothly upon the towel, and wrap the wig with the towel; be careful not to rub the wig into a ball.

 

Step #9:

Place the wig on the head model and roughly sort out the shape of the wig by hand; at this step you can spray some care solution on the wig.

 

Step #10:

Keep the wig in a ventilated place, dry it normally, and avoid direct sunlight. If you are in a hurry, you can use a hair dryer to dry the wig, but do not use high temperature.

 

Step #11:

Just wait for the wig to dry. Then wear it and enjoy it!

It is recommended to wash the wig every two weeks.

 

Please visit our website for more information on this topic.

For more information, please visit Anti Wrinkle Frown Lines Strips.