Do you need E-bike LCD Display solution? Choose us as your partner and we will provide you with a solution that will satisfy you.
LCD Display Information
The table and image below show the various features and information displayed on the LCD display.
LCD Display Controls
The display is controlled using the 3-button display remote mounted on the left side of the handlebar (depicted at right).
The top button shows an arrow pointing up (1), the bottom button shows an arrow pointing down (2), and the middle button is labeled "MODE" (3).
Reference the LCD Display Operations table in this manual for instructions on how to perform various operations using these buttons and, when applicable, other components of the bike.
LCD Display Operation
Factory Default Settings
P01: 002 (Display brightness 1-3)
P02: 001 (000 for Kilometres and 001 for Miles)
P03: 048 (48 Volts)
P04: 010 (Display shutdown 1-60 minutes)
P05: 001 (1= 5 PAS)
P06: 26.0* (Wheel diameter: 26* inches)
P07: 001 (1-100)
P08: 100 (Speed limit in kilometres: 1-100 : 100 = no speed limit, 025= Speed limit 25KM/H)
P09: 000
P10: 0002
P11: 001 (Pedal sensitivity setting range: 1-24)
P12 : 005 (Start intensity setting range: 1-5)
P13: 012
P14: 013
P15: 39.0 (low voltage alarm threshold)
P16: Odometer zero setting (Press key 5 for seconds to reset)
P17: 001
P18: 100
P19: 001
P20: 000
Common Status Code Meanings
If you have any questions on E-bike LCD Display. We will give the professional answers to your questions.